View PS2533-1-V-A_810733.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PHOTOCOUPLER
PS2533-1,-2,-4,PS2533L-1,-2,-4
HIGH COLLECTOR TO EMITTER VOLTATGE HIGH ISOLATION VOLTAGE MULTI PHOTOCOUPLER SERIES
DESCRIPTION
The PS2533-1, -2, -4 and PS2533L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor. The PS2533-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2533L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. -NEPOC Series-
FEATURES
* High collector to emitter voltage (VCEO = 350 V) * High Isolation voltage (BV = 5 000 Vr.m.s.) * High current transfer ratio (CTR = 4 000 % TYP.) * High-speed switching (tr, tf = 100 s TYP.) * Ordering number of tape product: PS2533L-1-E3, E4, F3, F4, PS2533L-2-E3, E4 * Safety standards * UL approved: File No. E72422 (S) * BSI approved: No. 8221/8222 * CSA approved: No. CA 101391 * NEMKO approved: No. P98101708 * SEMKO approved: No. 9824187/01-02 * DEMKO approved: No. 307863 * FIMKO approved: No. F1 11397 * VDE0884 approved (Option)
APPLICATIONS
* Telephone, Exchange equipment * FAX/MODEM
Document No. PN10233EJ01V0DS (1st edition) (Previous No. P11435EJ6V0DS00) Date Published February 2003 CP(K)
The mark
shows major revised points.
PS2533-1,-2,-4,PS2533L-1,-2,-4
PACKAGE DIMENSIONS (Unit : mm) DIP Type (New package)
PS2533-1
4.60.35
4
TOP VIEW
3
1. Anode 2. Cathode 3. Emitter 4. Collector
6.50.5
1
2 7.62
3.20.4 4.150.4
3.50.3
1.250.15
0 to 15 +0.1 0.25 -0.05
0.500.10 0.25 M
2.54
Caution New package 1-ch only
DIP Type
PS2533-1
4.60.5
4
TOP VIEW
3
1. Anode 2. Cathode 3. Emitter 4. Collector
PS2533-2
9.70.5
8 7
TOP VIEW
6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector
6.50.5
6.50.5
1
2 7.62
1
2
34 7.62
3.30.5 4.150.4
3.30.5 4.150.4
3.50.3
3.50.3
1.250.15
0 to 15 +0.1 0.25 -0.05
0.500.10 0.25 M
1.250.15 2.54
0.500.10 0.25 M
0 to 15 +0.1 0.25 -0.05
2.54
PS2533-4
19.80.5
TOP VIEW
16 15 14 13 12 11 10 9
6.50.5
1
2
3
7.62
3.30.5 4.150.4
3.50.3
45678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector
1.250.15 2.54
0.500.10 0.25 M
0 to 15 +0.1 0.25 -0.05
2
Data Sheet PN10233EJ01V0DS
PS2533-1,-2,-4,PS2533L-1,-2,-4
Lead Bending Type (New package)
PS2533L-1
4.60.35
TOP VIEW
4 3
1. Anode 2. Cathode 3. Emitter 4. Collector
6.50.5
1
0.25 +0.1 -0.05
2
3.50.3
1.250.15
0.25 M
2.54
0.15
0.90.25 9.600.4
Caution New package 1-ch only
Lead Bending Type
PS2533L-1
4.60.5
0.1 +0.1 -0.05
PS2533L-2
9.70.5
TOP VIEW
4 3
TOP VIEW
8 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 1 2 3 4
6.50.5
1
2
6.50.5
1. Anode 2. Cathode 3. Emitter 4. Collector
0.25 +0.1 -0.05
0.25 +0.1 -0.05
0.1 +0.1 -0.05
3.50.3
3.50.3
1.250.15
0.25 M
2.54
0.15
0.90.25 9.600.4
1.250.15
0.25 M
2.54
0.15
0.90.25 9.600.4
PS2533L-4
19.80.5
TOP VIEW
16 15 14 13 12 11 10 9
6.50.5
1
0.25 +0.1 -0.05
2345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector
3.50.3
1.250.15
0.25 M
2.54
0.15
0.90.25 9.600.4
0.1 +0.1 -0.05
0.1 +0.1 -0.05
Data Sheet PN10233EJ01V0DS
3
PS2533-1,-2,-4,PS2533L-1,-2,-4
MARKING EXAMPLE
PS2533-1
No. 1 pin Mark No. 1 pin Mark
PS2533-2, -4
2533 M 003
Assembly Lot
PS2533-2 M 003
Country Assembled Type Number Assembly Lot
M
0 03
M
0 03
Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code
Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code
Package Standard PKG New PKG
Made in Japan Made in Taiwan
Package Standard PKG New PKG
Made in Japan Made in Taiwan
Blank
E
F
Blank
F
4
Data Sheet PN10233EJ01V0DS
PS2533-1,-2,-4,PS2533L-1,-2,-4
ORDERING INFORMATION (Solder Contains Lead)
Part Number Package Packing Style Safety Standard Approval PS2533-1 PS2533L-1 PS2533L-1-E3 PS2533L-1-E4 PS2533L-1-F3 PS2533L-1-F4 PS2533-2 PS2533L-2 PS2533L-2-E3 PS2533L-2-E4 PS2533-4 PS2533L-4 PS2533-1-V PS2533L-1-V PS2533L-1-V-E3 PS2533L-1-V-E4 PS2533L-1-V-F3 PS2533L-1-V-F4 PS2533L-2-V PS2533L-2-V PS253L-2-V-E3 PS2533L-2-V-E4 PS2533-4-V PS2533L-4-V 16-pin DIP Magazine case 20 pcs PS2533-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2533-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs VDE0884 approved products (Option) PS2533-1 16-pin DIP Magazine case 20 pcs PS2533-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2533-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs Standard products (UL, CSA, BSI, NEMKO, SEMKO, DEMKO, FIMKO approved) Application Part Number PS2533-1
*1
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10233EJ01V0DS
5
PS2533-1,-2,-4,PS2533L-1,-2,-4
ORDERING INFORMATION (Pb-Free)
Part Number Package Packing Style Safety Standard Approval PS2533-1-A PS2533L-1-A PS2533L-1-E3-A PS2533L-1-E4-A PS2533L-1-F3-A PS2533L-1-F4-A PS2533-2-A PS2533L-2-A PS2533L-2-E3-A PS2533L-2-E4-A PS2533-4-A PS2533L-4-A PS2533-1-V-A PS2533L-1-V-A PS2533L-1-V-E3-A PS2533L-1-V-E4-A PS2533L-1-V-F3-A PS2533L-1-V-F4-A PS2533L-2-V-A PS2533L-2-V-A PS253L-2-V-E3-A PS2533L-2-V-E4-A PS2533-4-V-A PS2533L-4-V-A 16-pin DIP Magazine case 20 pcs PS2533-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2533-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs VDE0884 approved products (Option) PS2533-1 16-pin DIP Magazine case 20 pcs PS2533-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2533-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs Standard products (UL, CSA, BSI, NEMKO, SEMKO, DEMKO, FIMKO approved) Application Part Number PS2533-1
*1
*1 For the application of the Safety Standard, following part number should be used.
6
Data Sheet PN10233EJ01V0DS
PS2533-1,-2,-4,PS2533L-1,-2,-4
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified)
Ratings Parameter Symbol PS2533-1, PS2533L-1 80 6 1.5 150 1 350 0.6 150 3.0 300 5 000 -55 to +100 -55 to +150 2.4 240 1.2 120
PS2533-2, -4, PS2533L-2, 4
Unit
Diode
Forward Current (DC) Reverse Voltage Power Dissipation Derating Power Dissipation Peak Forward Current
*1
IF VR
mA V mWC mW/ch A V V mA/ch mW/C mW/ch Vr.m.s. C C
PD/C
PD IFP VCEO VECO IC
Transistor
Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation
PC/C
PC BV TA Tstg
Isolation Voltage
*2
Operating Ambient Temperature Storage Temperature
*1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output
Data Sheet PN10233EJ01V0DS
7
PS2533-1,-2,-4,PS2533L-1,-2,-4
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio (IC/IF) Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time
*1
Symbol VF IR Ct ICEO CTR VCE(sat) RI-O CI-O tr tf IF = 10 mA VR = 5 V
Conditions
MIN.
TYP. 1.15
MAX. 1.40 5
Unit V
A
pF
V = 0 V, f = 1.0 MHz VCE = 350 V, IF = 0 mA IF = 1 mA, VCE = 2 V IF = 1 mA, IC = 2 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 5 V, IC = 10 mA, RL = 100 10
11
30 400 1 500 4 000 6 500 1.0
nA % V
0.6 100 100
pF
s
*1
*1 Test circuit for switching time
Pulse input (PW = 1 ms, Duty cycle = 1/10) IF 50 VOUT RL = 100 VCC
8
Data Sheet PN10233EJ01V0DS
PS2533-1,-2,-4,PS2533L-1,-2,-4
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
150 400
TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE
Diode Power Dissipation PD (mW)
100 PS2533-2, -4 PS2533L-2, -4 50
PS2533-1 PS2533L-1 1.5 mW/C
300 PS2533-1 PS2533L-1 200 PS2533-2, -4 PS2533L-2, -4 100 2.4 mW/C 3.0 mW/C
1.2 mW/C
0
25
50
75
100
125
150
0
25
50
75
100
125
150
Ambient Temperature TA (C)
Ambient Temperature TA (C)
FORWARD CURRENT vs. FORWARD VOLTAGE
100 TA = +100 C +75 C +50 C +25 C 0 C -25 C -55 C
COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE
160 140
5.0
4.5 mA mA mA 4.0 mA 3.5 mA 3.0
10
Collector Current IC (mA)
Forward Current IF (mA)
120 100 80 60 40 20
1
mA 2.5 A 2.0 m
1.5 mA
1.0 mA
0.1
IF = 0.5 mA 1 2 3 4 5 6 7 8
0.01 0.6
0.8
1.0
1.2
1.4
1.6
0
Forward Voltage VF (V)
Collector to Emitter Voltage VCE (V)
COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE
Collector to Emitter Dark Current ICEO (A)
10 1 100 n 10 n 1n 100 p -50 -25 0 25 50 75 100 VCE = 350 V
COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE
500 100 50 10 5 1 0.5 0.1 0.0
mA IF = 5.0 A 2.0 m 1.0 mA
0.5 mA
Collector Current IC (mA)
0.2
0.4
0.6
0.8
1.0
1.2
Ambient Temperature TA (C)
Collector Saturation Voltage VCE(sat) (V)
Data Sheet PN10233EJ01V0DS
9
PS2533-1,-2,-4,PS2533L-1,-2,-4
NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE
Normalized Current Transfer Ratio CTR
CURRENT TRANSFER RATIO vs. FORWARD CURRENT
5 000
Current Transfer Ratio CTR (%)
1.2 1.0 0.8 0.6 0.4 0.2 0.0
;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;
Normalized to 1.0 at TA = 25 C, IF = 1 mA, VCE = 2 V 50 75 -50 -25 0 25 100 Ambient Temperature TA (C)
VCE = 2 V Sample A B
4 000
3 000
2 000
1 000 0 0.1
0.5
1
5
10
15
Forward Current IF (mA)
SWITCHING TIME vs. LOAD RESISTANCE
500 VCC = 10 V, IC = 10 mA 5 tr 0
Normalized Gain Gv
FREQUENCY RESPONSE
Switching Time t (s)
100 50 td tf 10 5 ts 1 20
-5 -10
RL = 1 k
100
10
VCE = 4 V, Vin = 0.1 Vp-p -15 -20 -25 1 k 1 F Vin
47 0.1
RL
Vout 1 10 100
50
100
200
500
1k
2k
-30 0.01
Load Resistance RL ()
Frequency f (kHz)
LONG TERM CTR DEGRADATION
1.2 1.0
CTR (Relative Value)
0.8 0.6 0.4 0.2 0.0 10
IF = 1 mA, TA = 25 C IF = 1 mA, TA = 60 C
102
103
104
105
106
Time (Hr)
Remark The graphs indicate nominal characteristics.
10
Data Sheet PN10233EJ01V0DS
PS2533-1,-2,-4,PS2533L-1,-2,-4
TAPING SPECIFICATIONS (Unit : mm)
Outline and Dimensions (Tape)
2.00.1 4.00.1
1.750.1
1.5 +0.1 -0
4.5 MAX.
16.00.3
7.50.1
1.550.1
8.00.1
10.30.1
5.30.1
4.00.1
0.4
Tape Direction
PS2533L-1-E3 PS2533L-1-E4
Outline and Dimensions (Reel)
2.00.5
2.00.5 13.00.2
R 1.0
21.00.8
80.01.0
2542.0
17.51.0
21.51.0
Packing: 1 000 pcs/reel
15.9 to 19.4 Outer edge of flange
Data Sheet PN10233EJ01V0DS
11
PS2533-1,-2,-4,PS2533L-1,-2,-4
Outline and Dimensions (Tape)
2.00.1 4.00.1
1.750.1
1.5 +0.1 -0
4.5 MAX.
16.00.3
7.50.1
1.550.1
8.00.1
10.30.1
5.30.1
4.00.1
0.4
Tape Direction
PS2533L-1-F3 PS2533L-1-F4
Outline and Dimensions (Reel)
2.00.5
2.00.5 13.00.2
R 1.0
21.00.8
3302.0
1001.0
17.51.0
21.51.0
Packing: 2 000 pcs/reel
15.9 to 19.4 Outer edge of flange
12
Data Sheet PN10233EJ01V0DS
PS2533-1,-2,-4,PS2533L-1,-2,-4
Outline and Dimensions (Tape)
2.00.1 4.00.1
1.750.1
1.5 +0.1 -0
4.5 MAX.
16.00.3
7.50.1
10.30.1
1.550.1
12.00.1
10.40.1
0.3
4.00.1
Tape Direction
PS2533L-2-E3 PS2533L-2-E4
Outline and Dimensions (Reel)
2.00.5
3302.0
2.00.5 13.00.2
R 1.0
21.00.8
17.51.0
21.51.0
1001.0
Packing: 1 000 pcs/reel
15.9 to 19.4 Outer edge of flange
Data Sheet PN10233EJ01V0DS
13
PS2533-1,-2,-4,PS2533L-1,-2,-4
NOTES ON HANDLING 1. Recommended soldering conditions
(1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (C)
(heating) to 10 s
260C MAX. 220C
to 60 s
180C
120C
12030 s (preheating)
Time (s)
(2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings.
14
Data Sheet PN10233EJ01V0DS
PS2533-1,-2,-4,PS2533L-1,-2,-4
USAGE CAUTIONS
1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10233EJ01V0DS
15
PS2533-1,-2,-4,PS2533L-1,-2,-4
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884)
Parameter Application classification (DIN VDE 0109) for rated line voltages 300 Vr.m.s. for rated line voltages 600 Vr.m.s. Climatic test class (DIN IEC 68 Teil 1/09.80) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.2 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices test) Upr = 1.6 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN VDE 0109) Clearance distance Creepage distance Comparative tracking index (DIN IEC 112/VDE 0303 part 1) Material group (DIN VDE 0109) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C VIO = 500 V dc at TA MAX. at least 100 C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = 175 C (Tsi) Ris MIN. 10
9
Symbol
Speck
Unit
IV III 55/100/21
UIORM Upr
890 1 068
Vpeak Vpeak
Upr
1 424
Vpeak
UTR
6 000 2 > 7.0 > 7.0
Vpeak
mm mm
CTI
175 III a
Tstg TA
-55 to +150 -55 to +100
12 11
C C
Ris MIN. Ris MIN.
10 10
Tsi Isi Psi
175 400 700
C mA mW
16
Data Sheet PN10233EJ01V0DS
PS2533-1,-2,-4,PS2533L-1,-2,-4
APPLICATION FOR TELEPHONE (EXAMPLE)
LINE Bell Ringing Signal (75 Vr.m.s., 16 Hz)
PS2505/PS2506 PS2705/PS2707 PS2805 etc.
VCC Bell Ringing Detect
PS2521 PS2525
Line Observe VCC
Dial Pulse PS2532/PS2533 Generator PS2732/PS2733 PS2832/PS2833
Dialer Circuit
CPU
OCMOS FET PS7xxx
Speech Circuit
IN OUT
Data Sheet PN10233EJ01V0DS
17
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of PS2533-1-V-A

	To Download PS2533-1-V-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .